Proxy ARP

For those familiar with ARP, proxy ARP solves the following problem illustrated in Figure 9-3, ``Proxy ARP example''. (For those unfamiliar with ARP, see the arp(ADMP) manual page.)

Hosts A and C need to communicate, and the only route is through host B as shown in the figure. The IP addresses that define the link between hosts A and B use the same subnet number as the Ethernet (LAN) (that is, 192.34.54.0) through which hosts B and C communicate. Therefore, host C believes the IP address 192.34.54.4 to have an Ethernet connection on the LAN. When the IP protocol layer of host C receives a packet addressed to 192.34.54.4, host C puts an ARP broadcast on the LAN asking the host of that IP address to respond with its Ethernet address. Because host A is not on the LAN, host C receives no response and believes it cannot communicate with that IP address.

Figure 9-3 Proxy ARP example

The proxy ARP solution to this problem is to put entries in host B's ARP mapping table that map the IP addresses 192.34.54.1 and 192.34.54.4 to the Ethernet address of host B on the LAN. These are called ``proxy ARP entries''. Now when host C broadcasts a request for an Ethernet address for IP address 192.34.54.4, host B will respond with its Ethernet address. Host C will send packets for 192.34.54.4 to host B's Ethernet address, and host B, if configured to forward these packets to host A, will forward them.

SCO PPP provides an endpoint configuration parameter called proxy for automatically putting the proxy ARP entries in the ARP mapping table. In the example shown here, host B should include the proxy parameter in its configuration for its end of the link with A. When the link is invoked, the proxy parameter causes the PPP daemon to search existing (but not ppp or loopback) network interfaces on host B to find an IP address that uses the same subnet number as the IP addresses of the link between A and B. If it finds such a case, it retrieves the Ethernet address for the network interface. It then inserts entries in host B's ARP mapping table that map the IP addresses for the link between A and B to the Ethernet address it found.

SCO SLIP provides an option to the slattach command for automatically putting the proxy ARP entries in the ARP mapping table. In the example shown here, host B should pass the option +a to slattach when using slattach to create the link between A and B. When passed this option, slattach searches existing (but not ppp or loopback) network interfaces on host B to find an IP address that uses the same subnet number as the IP addresses of the link between A and B. If it finds such a case, it retrieves the Ethernet address for the network interface. It then inserts entries in host B's ARP mapping table that map the IP addresses for the link between A and B to the Ethernet address that it found.

Home Notes Home MCSE MCSE MCITP + Security CCNA MCITP 2008  Boot Camp Schedule Register Frequently Asked Questions Course Fees Contact US Boot Camp Location Compare us to our competitors Testimonials Sitemap   Testimonials  Join MCSE MCITP Boot Camp & CCNA Boot Camp Back to Back Certification Today. links  270  290    291  293    294  298  299   Security  640-801  routing 811  821   831  Resources MCSE MCITP + CCNA  Training  Card pay  Papal  MCSE MCITP Notes  CCNA Notes    index main   root   link  resources home    Ref1 Ref2

Vibrant offers MCSE certification training boot camp for $5400 all inclusive, instructor led at California and Baltimore.

Vibrant Bootcamp Participants come from All Around the World. Vibrant has trained students from more than 15 countries like USA, UK, (Scotland, Ireland, Wales), Switzerland, Germany, Australia, Canada, France, Holland, Japan, Belgium, Bahrain, New Zealand, Tanzania, Turkey, Kenya and more.