Exterior Gateway Protocol (EGP)

The Exterior Gateway Protocol (EGP) is an exterior routing protocol used for exchanging routing information with gateways in other autonomous systems. Unlike interior protocols, EGP propagates only reachability indications, not true metrics. EGP updates contain metrics, called distances, which range from 0 to 255. gated will only compare EGP distances learned from the same AS.

Originally EGP reachability information was passed into ARPANET/MILnet ``core'' gateways where the best routes were chosen and passed back out to all connected autonomous systems. As the Internet moved toward a less hierarchical architecture, EGP, an exterior routing protocol which assumes a hierarchical structure, became less effective.

Before EGP sends routing information to a remote router, it must establish an adjacency with that router. This is accomplished by an exchange of Hello (not to be confused with the HELLO protocol, or OSPF HELLO messages) and I Heard You (I-H-U) messages with that router. Computers communicating via EGP are called EGP neighbors, and the exchange of Hello and I-H-U messages is referred to as acquiring a neighbor. Once the neighbor is acquired, the system polls the neighbor for routing information. The neighbor responds by sending an update containing routing information. If the system receives a poll from its neighbor, it responds with its own update packet. When the system receives an update, it includes routes from the update into its routing database. If the neighbor fails to respond to three consecutive polls, gated assumes that the neighbor is down and removes the neighbor's routes from its database.

The EGP protocol is described in RFC 827 and RFC 904.

Network Access Protection Design Guide

Updated: October 6, 2008

Applies To: Windows 7, Windows Server 2008, Windows Server 2008 R2, Windows Vista

Network Access Protection (NAP) is one of the most anticipated features of the Windows Server� 2008 operating system. NAP is a new platform that allows network administrators to define specific levels of network access based on a client�s identity, the groups to which the client belongs, and the degree to which the client complies with corporate governance policy. If a client is not compliant, NAP provides a mechanism for automatically bringing the client into compliance (a process known as remediation) and then dynamically increasing its level of network access. NAP is supported by Windows Server 2008 R2, Windows Server 2008, Windows 7, Windows Vista�, and Windows� XP with Service Pack 3 (SP3). NAP includes an application programming interface that developers and vendors can use to integrate their products and leverage this health state validation, access enforcement, and ongoing compliance evaluation. For more information about the NAP API, see Network Access Protection (http://go.microsoft.com/fwlink/?LinkId=128423).

The following are key NAP concepts:

NAP Agent. A service included with Windows Server 2008, Windows Vista, and Windows XP with SP3 that collects and manages health information for NAP client computers.
NAP client computer. A computer that has the NAP Agent service installed and running, and is providing its health status to NAP server computers.
NAP-capable computer. A computer that has the NAP Agent service installed and running and is capable of providing its health status to NAP server computers. NAP-capable computers include computers running Windows Server 2008, Windows Vista, and Windows XP with SP3.
Non-NAP-capable computer. A computer that cannot provide its health status to NAP server components. A computer that has NAP agent installed but not running is also considered non-NAP-capable.
Compliant computer. A computer that meets the NAP health requirements that you have defined for your network. Only NAP client computers can be compliant.
Noncompliant computer. A computer that does not meet the NAP health requirements that you have defined for your network. Only NAP client computers can be noncompliant.
Health status. Information about a NAP client computer that NAP uses to allow or restrict access to a network. Health is defined by a client computer's configuration state. Some common measurements of health include the operational status of Windows Firewall, the update status of antivirus signatures, and the installation status of security updates. A NAP client computer provides health status by sending a message called a statement of health (SoH).
NAP health policy server. A NAP health policy server is a computer running Windows Server 2008 with the Network Policy Server (NPS) role service installed and configured for NAP. The NAP health policy server uses NPS policies and settings to evaluate the health of NAP client computers when they request access to the network, or when their health state changes. Based on the results of this evaluation, the NAP health policy server instructs whether NAP client computers will be granted full or restricted access to the network.